Installing a shower unit can pose a number of problems if you are not careful. The two most important considerations are the water pressure and the supply pipes. Water pressure is essential if you want a fast flowing shower that is consistent. Most homes suffer from low pressure and this is usually because of the height of the tank. It is possible to raise the tank height to create greater pressure, and most of the time this only needs to be about 10 or 20 centimetres. You could create a new platform for the tank and raise it for more power if you have the available space to do so. If you choose to increase the tank height then you will also need to increase the length of the pipes that feed it.
If it is not feasible to do this then you could add a booster pump. These come in single or twin designs depending on the amount of extra power you require. They will need a power supply so you will need the services of a qualified electrician for this work if you can’t do it yourself. The booster pump usually fits to the main water supply, although some can be fitted to the shower mixer unit for the same effect. You can pick up one of these pumps at stores such as argos or any reputable hardware store on the street or on the internet.
You can also increase the pressure by buying bended pipes, or creating an elbow joint to the supply. Just be careful not to kink the pipe if you do this or you could cause a burst or leak. Once you have gone through these two factors you can look at what type of shower unit you require. Power showers are the most popular choices these days, and most have duel controls so you can alter the water temperature with ease. They also have different shower heads available that spurt water from all sorts of angles and places. Argos uk have a good stock of shower heads that come in a variety of colours and styles. Most shower heads can be attached to different units, so there is some flexibility with them. The final piece of the installation is the actual shower cubicle, or curtain if you have a shower integrated over the bath tub. Be aware that curtain track fixtures will usually have to be drilled into tiles, which can be a little tricky.
Related posts:
